Post by panic on Jun 5, 2015 17:48:42 GMT 10
I know im going to regret this but the 28 is up for sale, fancy a change from the old toyota!
so specs are:
• 18rg fuel injected with itb's off a GSXR750 motorbike all being run by a microsquirt ecu
• lift pump in the back to a surge tank and high pressure pump under the car
• pacemaker extractors to a full 2 1/4 exhaust with hot dog a one muffler at the back
• 15x8 0 offset XXR 002's painted black with bridgestone re002 (90%)
• XT130 front struts converted to coilovers with ST185 gt four inserts and weld on spring perch kit
• 2 pot XT130 corona front brakes and hubs
• Whiteline front sway bar
• JZA70 recaro seats mounted on standard rails - a few marks and a couple of little cuts
• GT dash gauges - all work except ammeter as its not hooked up at the battery
• GT handbrake cover
• GT front grill and badge
• Nardi torino steering wheel
• Alpine headunit and speakers – 6”fronts in door pods and 4”rears in factory location
• Repainted in matte green with black plasti-dipped chrome work
• front chin spoiler
• Rear spoiler off a hakosuka skyline
• rear window louvre
• Fiberglass racing jacket
• Rego till august
car has just been back on the road after being fuel injected, still needs a little bit of tune work but starts and drives fine.
will come with the following spares and upgrades:
• 270 late efi head - fully rebuilt with 304 degree 10.5mm lift clive cam reground cams
• 8 x 1mm oversize 9.7 compression ratio 18rg pistons - 3 are toast but 5 are in good condition
• 40mm solex carbs and manifold - rebuilt shortly before going fuel injected
• Spare dash with excellent condition woodgrain
• Spare driver and passenger door glass
• Spare chrome work – an assortment some in good condition some not
• Factory radio surround and swiches – uncut
• Standard metal front valance
• Rear 3 piece top secret spoiler
• Ke70 rack and pinion front cross member – modified to mount straight to an ra28 with mounts to bolt in a 1UZ V8
I won’t sell the spares separately unless the car is sold first.
Price $17000
Can negotiate price based on what comes with the car, can even remove teh fuel injection setup and revert back to carbs if someone really wants
A few pics below and also a link to my build thread.
If you’re interested call me on 0438061848 or message me on here
link to build thread:
ccctasmania.proboards.com/thread/362/panics-ra28
so specs are:
• 18rg fuel injected with itb's off a GSXR750 motorbike all being run by a microsquirt ecu
• lift pump in the back to a surge tank and high pressure pump under the car
• pacemaker extractors to a full 2 1/4 exhaust with hot dog a one muffler at the back
• 15x8 0 offset XXR 002's painted black with bridgestone re002 (90%)
• XT130 front struts converted to coilovers with ST185 gt four inserts and weld on spring perch kit
• 2 pot XT130 corona front brakes and hubs
• Whiteline front sway bar
• JZA70 recaro seats mounted on standard rails - a few marks and a couple of little cuts
• GT dash gauges - all work except ammeter as its not hooked up at the battery
• GT handbrake cover
• GT front grill and badge
• Nardi torino steering wheel
• Alpine headunit and speakers – 6”fronts in door pods and 4”rears in factory location
• Repainted in matte green with black plasti-dipped chrome work
• front chin spoiler
• Rear spoiler off a hakosuka skyline
• rear window louvre
• Fiberglass racing jacket
• Rego till august
car has just been back on the road after being fuel injected, still needs a little bit of tune work but starts and drives fine.
will come with the following spares and upgrades:
• 270 late efi head - fully rebuilt with 304 degree 10.5mm lift clive cam reground cams
• 8 x 1mm oversize 9.7 compression ratio 18rg pistons - 3 are toast but 5 are in good condition
• 40mm solex carbs and manifold - rebuilt shortly before going fuel injected
• Spare dash with excellent condition woodgrain
• Spare driver and passenger door glass
• Spare chrome work – an assortment some in good condition some not
• Factory radio surround and swiches – uncut
• Standard metal front valance
• Rear 3 piece top secret spoiler
• Ke70 rack and pinion front cross member – modified to mount straight to an ra28 with mounts to bolt in a 1UZ V8
I won’t sell the spares separately unless the car is sold first.
Price $17000
Can negotiate price based on what comes with the car, can even remove teh fuel injection setup and revert back to carbs if someone really wants
A few pics below and also a link to my build thread.
If you’re interested call me on 0438061848 or message me on here
link to build thread:
ccctasmania.proboards.com/thread/362/panics-ra28