|
my Ta22
Apr 14, 2014 19:57:48 GMT 10
Post by evanta22 on Apr 14, 2014 19:57:48 GMT 10
Photos.......................... where are the photos
You wont be disappointed with the T3 stuff, everything I have got has been top quality and fits perfectly.
|
|
|
my Ta22
Apr 14, 2014 21:28:52 GMT 10
via mobile
Post by ta22hp on Apr 14, 2014 21:28:52 GMT 10
I will take some when im down at pops next. Can't wait to bolt it on. Yer am excited for t3 gear
|
|
|
my Ta22
Apr 15, 2014 9:49:12 GMT 10
via mobile
Post by ta22hp on Apr 15, 2014 9:49:12 GMT 10
Hubs and Coilovers are coming
|
|
|
my Ta22
Apr 15, 2014 15:32:42 GMT 10
Post by evanta22 on Apr 15, 2014 15:32:42 GMT 10
The T3 stuff will take about a week.
|
|
|
my Ta22
Apr 15, 2014 18:18:15 GMT 10
via mobile
Post by ta22hp on Apr 15, 2014 18:18:15 GMT 10
So that's not that bad shipping
|
|
|
my Ta22
Apr 22, 2014 20:09:30 GMT 10
via mobile
Post by ta22hp on Apr 22, 2014 20:09:30 GMT 10
I have decided to stick with the original and not go with the adjustable 4 link. I would like the car to be quiet, even if it is getting rid of potential wicked handling. Coilover should be arriving soon
|
|
|
my Ta22
Apr 23, 2014 14:41:21 GMT 10
Post by evanta22 on Apr 23, 2014 14:41:21 GMT 10
you can put Urethane bushes in to replace the rubber bushes which will be a lot better than the rubber ones.
|
|
|
my Ta22
Apr 23, 2014 17:05:51 GMT 10
via mobile
Post by ta22hp on Apr 23, 2014 17:05:51 GMT 10
Do you know where i can get some? I will have to replace the bushings anyway. Im in the process of moving the brackets from the ta22 to the hilux.
|
|
|
my Ta22
Apr 24, 2014 15:57:39 GMT 10
Post by evanta22 on Apr 24, 2014 15:57:39 GMT 10
Pedders sell the bushes, but they are pricey, or there are always cheap sets on Ebay or Goggle. Shop around, I think Repco, Bursons and supercheap sell them as well.
|
|
|
my Ta22
May 12, 2014 23:09:08 GMT 10
via mobile
Post by ta22hp on May 12, 2014 23:09:08 GMT 10
A real quick update. Deposit is on the motor. Have been told it will be done around June. I have tacked all the brackets to the Hilux diff using a special jig i made. I will have to check it after Ross show before i get it professional welded so it doesn't flex. Boot spoiler is on and looking sexy. I will put photos up another time. Organized Tas mobile mechanics to build/modify a ke70 crossmember and rack plus engine mounts and gearbox mounts and fit engine for 1000-1500 which is awesome. I am trying to get a diff centre with 3.7 ratio lsd off ebay. Coilovers are still not here yet .
|
|
|
my Ta22
May 14, 2014 11:39:41 GMT 10
Post by evanta22 on May 14, 2014 11:39:41 GMT 10
are you getting the ready made Coilovers or the weld in ones?
|
|
|
my Ta22
May 14, 2014 16:39:35 GMT 10
via mobile
Post by ta22hp on May 14, 2014 16:39:35 GMT 10
Yer they must have a bit of a back order.
|
|
|
my Ta22
May 15, 2014 19:55:43 GMT 10
Post by evanta22 on May 15, 2014 19:55:43 GMT 10
I'm ordering mine now. But they are the weld on ones, with the short stroke AGX shockies.
|
|
|
my Ta22
May 16, 2014 10:20:58 GMT 10
via mobile
Post by ta22hp on May 16, 2014 10:20:58 GMT 10
Can you weld good?
|
|
|
my Ta22
May 16, 2014 14:36:47 GMT 10
Post by evanta22 on May 16, 2014 14:36:47 GMT 10
Not at all, but my Dad is a welder and he can help me.
|
|
|
my Ta22
Jun 10, 2014 21:35:48 GMT 10
Post by ta22hp on Jun 10, 2014 21:35:48 GMT 10
a long waited up date. I got my hubs and coilovers, along with my AE86 big brake kit from t3. I went to put it all in, and once I went to put the wheels on after it was all together I found out that they had welded the casting on the coilovers on wrong angle so the wheel hits the coilover one side while the other is fine. I have sent an email to t3 to figure out what to do. either send it all the way back or get it fixed local. my motor is been built and should be done by the end of june. I went and saw the progress and it was so pistonie juiceness. I have bought a new gearbox, its a sr20 bell housing with an rb20 gearbox so the gearbox is shorter than standard sr20. my diff has been welded and has custom brackets to hold the s13 calipers on. I have had falcon rotors re-drilled for on the back at the same time. once the motor is built and the coilovers are fixed and diff in, the car will be booked into tas mobile mechanics. they have quoted me 1000-1500 to get a custom ke70 crossmember, engine mounts gearbox mounts and engine fitted. mmm.... there's only one brake kit in this pic as they came in different boxes and I only got one before the weekend. stock front rotor and new ae86 rotor
|
|
|
my Ta22
Jun 10, 2014 21:45:51 GMT 10
Post by ta22hp on Jun 10, 2014 21:45:51 GMT 10
my new special gearbox perjero master cylinder that has been installed in my car. easy upgrade. I want to get new wheels, either superlites or rewinds. evan photo shopped this for me
|
|
|
Post by ukedozroeim on Oct 3, 2019 0:51:08 GMT 10
|
|